Forgetting the combination code is a common issue, as it can happen to anyone. But the most annoying or even frustrating thing is that you can’t remember the code after a lot of attempts. In this situation, the owner thinks that they have lost their possessions and didn’t get them back. One will start thinking of damage to the security box because the contents stored in it are more valuable than the box itself. Don’t worry about this moment. We give you enough information on how to open a safe without a key or combination.
If you have a digital safe, then a locksmith also can’t help you in this situation. The electronic safes are one of the best-secured options to store your valuables. But it becomes a headache when you can’t access it due to any issue.
It is because it seems very difficult to crack a digital safe compared with traditional ones. One will be surprised to know that it also has some weak points. These weak points can be beneficial for the owners in this situation.
Therefore, it becomes straightforward to re-access it by putting in a bit of effort. If you are reading this article, then it must likely seem that you have also forgotten your combination code. We are here to answer your question, that is “how to open a digital safe without a combination?” quickly and feasibly.
Let’s open your safe!
Well, there are two different ways, or we can consider it as the weak points of the safe. Through which one can easily open their security box without damaging any component. One can reset their code to open it when they forget the code, or the second way is to open it with the dial technique.
Both methods need a study to be done correctly. Now, step forward to learn the whole process of how to open a safe without a combination.
Reset the combination:
The first method is to reset the code. For this, you will need the following tools to be done.
- Torch to locate the bolts
- Screwdriver
- A thin wire or a thinner rod
- A new code in your mind that you can easily remember by yourself.
These tools are enough to open an electronic security box. Let’s see the full procedure.
1. Locate the bolts:
The very first thing to do is to use a flashlight on the backside of the security box. It is because most of the digital safes have a small hole in their back portion, and they are covered with bolts. You find the bolt openings, step forward to the next step.
2. Open the bolts:
Now is the time to open the bolts that you have found in the back portion of your electronic safety box. One can use a screwdriver, which is the same size as the bolts. After opening the bolt, you will get a hole there.
3. Insert a slim stick in the hole:
After opening the bolts again, you have to use the flashlights. It is because the holes are tiny. You have to locate a red button that appears inside it. Now you have to manage a way to reach the red button. Locate the ideal hole from where you can quickly push that button with your slim rod or wire. The red button will allow you to reset the password.
4. Push the button:
As we said, the red button inside the box will allow you to reset the combination. You will have to use a slim rod to push it. Once you push the button, the digital safe will alert you by beeping that you have succeeded in your task. If you didn’t get any sound, it means you have to push it again.
5. Enter a new code:
Now you have almost finished the task. The time is to give a unique code to your safe. You can get back to the keypad and locate the configuration on the LCD screen. Make sure that the code you are using now is easy to remember, so you will never need to retake this much stress. After entering the code, you have to press the OK or enter button to save the changes.
6. Open your safe:
Time to forget the stress because now you have opened your electronic security box. See how easy it is. Some standard tools and amazing tricks have saved your lot of money and make you able to re-access it.
Use the dial to open your digital safe:
Most of the latest models of electronic safes come with the dial. If your device has this feature then the task becomes more comfortable for you. Let’s see how it is possible to open a digital safety box by using a dial. You need a rubber mallet and a pin to turn it. Have a look at the whole process.
1. Turn the dial in the opposite direction:
There is a pin inside the lock mechanism that is responsible for the lock system to move freely. This pin will help you in this situation. As it is the weakest point of a digital safe, but it will surely help you out from this situation.
The right direction of the dial is clockwise. So as we said, you have to turn it in the opposite direction. One will have to use a pin to insert in the dial and turn it counterclockwise or vice versa.
2. Hit the box gently:
Yes, you have read right. You will have to hit the electronic safety lightly with a rubber mallet box on the upper part. It is because; by hitting the box, the pin will move and leave the sliding bolt free. One thing that you have to keep in mind is that the pin moving effect will last only for a few seconds; therefore, you have to keep trying to turn the dial.
3. Wait for the pin to get down:
As we said, you have to keep trying to turn the dial in the opposite direction. The task will not be completed in a single attempt as you have to wait for the pin to get down. This technique needs proper timing and concentration.
Keep hitting the box gently with the rubber mallet until the pin gets down. It becomes very easy to open the safe once it gets down.
It is the easiest technique to open a digital safe when you have forgotten the combination. Once you have opened the box, you can reset the code by pressing the red button that appears on the lock system.
This method will also never harm your expensive security box, anyway. But it needs to have a dial-in it. If your model does not have this feature, then you can try the first technique, which is your last hope.
FAQ section:
1. What to do if both methods didn’t work?
Well, there are very few chances that any of these methods will not help you. But if these tricks didn’t work, then it is good to consult with the manufacturer before setting your mind to damage it. Damaging should be the last option for you. Therefore, try at your level best to avoid any kind of loss.
2. Will these methods help me when batteries are dead?
Yes, these methods will surely help you to access your safety box when it has gotten locked due to any reason. These methods are effortless to do. If you are looking for some other tricks for the dead battery issue, then an article written by us will surely help you out of this situation. You can check for more methods in that article.
3. Easy steps to open a digital safe without any keys:
Many of the cheapest models of the digital safes have a key feature to unlock it. If you have lost the keys and also forgotten the combination, then the keyhole will help you to open it. You will need a smaller screwdriver to insert it into the keyhole.
You will need to turn the screwdriver counterclockwise and hit the upper portion of the box gently. The task will need patience as you have to wait for the lock pin to get down. The technique is almost similar to the dial technique. Using a screwdriver and having a bit of patience will help you to open your safe easily.
Bottom lines!
Electronic safes are the best-secured, and one can purchase them. It is an option to store your valuables safely. Since it has some weak points, it can still be very difficult for burglars to spend this much time opening it by using these tricks. One can fix their digital safe in any hidden place so that burglars would not be able to take it away.
The techniques discussed in this article will surely help you out of the situation when you have forgotten the combination. It is better to use these tricks and avoid damaging the safety box. It is because digital safes are expensive to buy.
